Operating instructions

88
Overview
Fire On/Off Wall Switch
Hearth (if used) may be
combustible material.
Minimum 1/2” (13 mm) gap
required below backing plate
to surface of hearth or fl oor
in front for air fl ow. Raise
enrtire unit accordingly.
Note: Unit
projects forward
of fi nished wall.
Allow for tile, etc.
Backing Plate required
(sold separately)
Bezel required
(sold separately)
650IR
Field convertible
from top to rear
outlet
Framing—See Framing section
Remote Handset Wall Holder
Wall Finish
May be combustible material.
NOTE: Finished wall surface,
including tiles, etc., MUST be
minimum 3/4” (19 mm) set back
from the front face of the heater.
Combustible framing
allowed beneath
fi replace. When
the appliance is
installed directly on
carpeting, tile or
other combustible
material other than
wood fl ooring, the
appliance shall be
installed on a metal or
wood panel extending
the full width and
recessed depth of the
appliance.
Min.
3/4”
(19 mm)
Min. 1” (25 mm) for
combustible material