User manual
VALOR
-------------------------------------------------------MULTIMEDIA---
Read all
of
the instructions below before beginning your installation.
We
recommend that you
have your unit installed by an experienced car audio/navigation system installer (MECP
certified).
IMPORTANT NOTICE: It is very important that you read the
WARNINGS
and NOTES
in
this
manual to ensure correct installation and use
of
your unit.
Features
7" Digital TFT Display
• DVD/DVD-RIDVD-RWNCD/CD/CD-RICD-RW Compatible
• Touch-screen Control with Dynamic Graphic User Interface
• Built-in
45W
X 4 outputs amplifier,
4.1
channels surround sound output
• Bluetooth with
A2DP
& Hands-free Cell phone use with Phonebook
• AM/FM Tuner with
48
Memory Presets
•
SO
Card Slot on Front Panel , Support SDHC-up to 32GB
• Rear 2.0 High Speed USB Port (support max.
500GB
external hard drive)
• Rear Auxiliary
• Back-up Camera Input
• Steering Wheel Control Module Integrated (Analog)
Tools and Supplies
We suggest using these tools and supplies to install the unit.
• Torx type, flat-head and Philips screwdrivers
• Wire cutters and strippers
• Tools to remove existing radio (screwdriver, socket wrench set
or
other tools)
• Electrical tape
• Crimping tool
• Crimp connections
• Volt meter/test light
• 18 gauge wire
for
power connections
• 16 - 18 gauge speaker wire
• Heat shrinks tubing
• Soldering iron and solder
Warning
1.
Only connect the unit to a 12-volt negative ground system.
2.
Never install this unit where operation and viewing could interfere with safe driving conditions.
3.
To reduce the risk
of
a traffic accident (except when using the backup camera feature) never
use the video display function while driving the vehicle. This may be a violation
of
local laws.
4. Never disassemble
or
adjust the unit without the assistance
of
a professional.
For
details,
please consult your local car stereo/Automotive electronic specialist shop.
5.
To prevent injury from shock
or
fire, never expose this unit to moisture
or
water.
6.
Never use irregular discs, the only recommended disc size is a 12cm round disc.
7.
To prevent damage to the mechanism inside this unit, avoid dropping the unit.
8.
To ensure the touch screen is functioning properly please avoid hard impact to the
TFT
monitor.
9.
Do not change the fuse on the power wire without professional guidance. Using an improper
fuse may cause damage to the unit and result
in
a fire.
5