User manual
YI1LOR
---------------------------------------------------------MULTIMEDIA---
Balance & Fader
You can adjust the sound from left to right and from front to rear.
Loudness
This feature will increase the bass
& treble level at lower volumes.
NOTE: The Bass and Treble levels are only adjustable when EQ is on "User" mode.
The Loudness function increases the sound ranges from low level to high level.
Exiting the Equalizer Setting
Touch the return arrow on the top right corner of the screen or press the (SEL) button
on
the
remote control to exit the Equalizer setting.
System Reset
To reset the system
in
case
of
a halt or other unusual operation, use the tip
of
a pen to press the
RESET button located on the front top-right corner
of
the unit. After the system resets, the unit
will restores the default settings before it was last powered off.
Mute
The volume can be mute by the following:
1.
Press the MUTE button (
c::JX
)
on
the remote control to mute the volume from the unit.
2. Press the <!>/MUTENOL knob
on
the panel.
3. Turning the <!>/MUTENOL knob counter-clockwise on the panel to decrease the volume level
to "0".
NOTE: Press the MUTE button on the remote control again to restore the volume.
Adjusting the volume
or
using any of the audio set-up features will cancel the mute function.
13