User manual

VALOR
-------------------------------------------------------MULTIMEDIA---
Rear Camera
Mode
When the vehicle
is
placed
in
"Reverse",
and a rear camera is connected to the unit, the monitor
will automatically
switch to the camera input source.
Please make sure the reverse wire is
properly
connected.
Screen Adjustment
"COLOR" "CONTRAST"
and
"BRIGHTNESS"
can be adjusted.
Screen Adjustment Procedure
1.
Enter the Screen adjustment mode:
Press the
PIC
button
on
the remote
control
or go to main menu, then
select SETUP
and then
press the screen.
2.
Select
settings:
Press
the(*')
buttons
on
the remote or
on
the screen when
in
the
SETUP
mode, and then
adjust the
selected
feature to the desired setting.
3.
Press the back icon
located on the
top right corner
of
the screen
or
press the
SETUP
button (remote control) to
EXIT
the screen.
Parking Brake
1.
When the
vehicle is stopped and the parking brake
is
on, the "PARKING Brake"
wire must
be
connected to the parking brake(-) switch
in
order for the monitor to
display
video.
2.
The Parking brake does not apply
when using the reverse backup camera feature.
3.
When the
"parking brake"
is
off, the front monitor
will display a
"Caution"
with
blue
background,
preventing the driver from watching video while
driving. This is for your safety and to reduce the
risk
of
a traffic accident.
Please
see the "INSTALLATION SECTION"
for
installation
guidance on the
parking brake wire.
11