Unit installation

Chic
! The lower section of the fascia is secured
with magnets. Remove this by pulling clear of
the fascia (See figure 38).
! Remove the two tubular trim sets from the
top and bottom of the fascia. To do this simply
lift upward and forward (See figure 39).
! Unscrew and remove the two screws that
secure the bottom of the fascia sides to the
convection box (See figure 39).
! Remove the wiring loom connectors from
the left hand
side of the gas
valve.
! Raise the
fascia to allow
the retaining
lugs at the top to
clear the slots in
the convection
box hood and
then lift clear
(See figure 40). Be careful not trap the
wiring loom when lifting clear.
Page 33
INSTALLER GUIDE
Figure 40.
Figure 39. Removing the ‘Chic’ hanging trims
Figure 38.Removing the lower section
of the ‘Chic’ fascia.