Owner`s manual

6.0 Recessed Insert Applications
Rear or Top Outlet Conversion to co-linear liners
using 556 CLA Co-Linear Adapter. ( all fronts )
( Simpson DuraVent 923 GCL may also be used as an alternate to
the 556 CLA)
Co-Linear Installation into Existing F/P
Only for use when retrofitting a non-combustible fireplace and chimney.
The appliance must not be connected to a chimney flue serving a
separate solid-fuel burning appliance.
Requires 556 CLA Co-Axial to Co-Linear appliance adapter ( or
alternatively, a 923 GCL), two lengths of 3” dia. Flexible Chimney liner
, co-linear termination kit and flashing #923GK and either high wind
vertical vent terminal cap #991 or a 980 Low Profile vertical termination
cap . Zero Clearance stand-offs and insulation pads, supplied with the
various fronts are not required for this application. A model 3336
Closure Plate is available to cover fireplace openings.
23 of 48
923 GK Termination
3336 CP Closure Plate ( 536 & 541 Fronts)
923 GCL Adapter
(
alternate to 556 CLA
)
556 CLA Kit Components
556 CLA Rear Mounted
556CLA Top Mounted
991 High Wind Cap
980 Low Profile Cap