Owner`s manual

Figure 37
5.5.12 Top vent
connection, corner
location, vertical
rise, horizontal
termination, 45°
pipe bend (all
fronts)
(Figs 35 & 37)
Can be used with either #551DVK
standard vent kit or #984 Dura-vent
terminal cap and accessories.
Adapter #817VAK, two 45° elbows
#945B, one 90° vent elbow #990B
and Dura-vent pipe lengths will be
required. (See venting section of this
manual).
All vertical dimensions and
clearance limits are as section 5.5.9.
Figure 38
5.5.13 Top vent connection, vertical vent
rise, through the roof termination
(all fronts)(Fig. 38)
Adapter #817VAK, two 45° elbows #945B, Dura-vent
pipe lengths, a vertical vent terminal and roof flashing will
be required. Various other ceiling or roof items may be
necessary depending on the particular installation (See
venting options section of this manual).
21 of 48