Owner`s manual

Figure 18
4.2.14 Top vent connection,
corner location, vertical
rise, horizontal
termination, 45° pipe
bend (Figs 16 & 18)
Can be used with either #551DVK
standard vent kit or #984 Dura-vent
terminal cap and accessories.
Adapter #817VAK, one 90° elbow #990B,
one 45° elbow #945B and Dura-vent pipe
lengths will be required. (See venting
section of this manual).
All vertical dimensions and clearance limits
are as section 4.2.11.
4.2.15 Top vent connection,
corner location, vertical
rise, straight horizontal
termination (Figs 16 &
19)
Figure 19
Can be used with either #551DVK
standard vent kit or #984 Dura-vent
terminal cap and accessories.
Adapter #817VAK, one 90° elbow #990B
and Dura-vent pipe lengths will be
required. (See venting section of this
manual).
All vertical dimensions and clearance limits
are as section 4.2.11.
.
Figure 20
4.2.16 Top vent connection, vertical vent rise,
through the roof termination (Fig. 20)
Adapter #817VAK, Dura-vent pipe lengths, a vertical vent
terminal and roof flashing will be required. Various other
ceiling or roof items may be necessary depending on the
particular installation (See venting options section of this
manual).
13 of 48