Owner`s manual

Rear vent connection,
installed to fireplace chimney
with co-linear liners (Fig.14)
Only for use when retrofitting a non-
combustible fireplace and chimney.
The appliance must not be connected to
a chimney flue serving a separate solid-
fuel burning appliance.
Requires 556 CLA Co-Axial to Co-
Linear appliance adapter, two lengths of
3” dia. Flexible Chimney liner , co-
linear termination kit and flashing
#923GK and either high wind vertical
vent terminal cap #991 or a 980 Low
Profile vertical termination cap .(See
vent options section of this manual).
Figure 14
Fig 15.
552 BVK Adapter
4.2.10 Rear Vent Conversion to B-
Vent using 552 BVK Adapter
Free Standing Only ( Fig 15)
Used to field convert heater from direct
vent to 4” dia. gravity vent on free standing
units only . A full installation and operating
manual is supplied with the kit.
4.2.11
11 of 48