Unit installation

as a stable, non-reactive hazardous waste and may be disposed at a landfill

licensed to accept such waste. Protective clothing is not required when

handling these articles, but we recommend you follow the normal hygiene rules

of not smoking, eating or drinking in the work area and always wash your

hands before eating or drinking. This appliance does not contain any

component manufactured from asbestos or asbestos related products.

2. APPLIANCE DATA AND EFFICIENCY

2.1 General information.

Under no circumstances is this fire to be converted to LPG. An LPG conversion kit

does not exist for this gas fire.

The appliance information label is located on a plate at the base of the fire. This can

be seen by removing the lower front casting / fire front.

Before continuing with the installation of this appliance please complete the

information on the last pages of the owner guide.

Page 8

Gas Natural

Inlet pressure 20mbar

Input - Max. (Gross) 3.65kW (12,454 Btu/h)

Input - Min. (Gross) 1.5kW (5,118 Btu/h)

Inlet pressure (Cold) 20.0 ± 1.0mbar (8.0 ± 0.4in w.g.)

Gas connection 8mm pipe

Main burner Simplex aerated

Burner injector Cat. 92 size 280

Pilot unit

Left side of firebox. Combined pilot jet, thermocouple sensor

and electrode. SIT ref. NGOP9706

Ignition Integral piezo on gas valve.

Aeration adjustment None required

Controls

Manual pilot and main burner off/on control (Right control).

Separate variable manual control for main burner (Left

control). Fitted with flame supervision device and integral

piezo igniter.

Walls

Minimum 102mm (4in.) thick.

Maximum 660mm (26in.) thick.

INSTALLER GUIDE