Unit installation

6.2 Appliance disassembly.

Fascia removal (See figure 7).

 Remove the two screws securing the bottom of the

fascia to the sides of the convection box.

 Raise the fascia to allow the retaining lugs at the top

to clear the slots in the convection box hood and then lift

clear.

 Place the fascia in a safe place away from your

immediate work area.

Window and ceramic fuel effect removal.

 Unscrew and remove the three spring loaded window

fixing screws and bushes from the base of the window

frame (See figure 8). Keep the screws and bushes in a

safe place.

 Gently swing the base of the window frame forward

while lifting the frame upwards. The window should lift

clear of the fire. Put the window in a safe place away

from your immediate work area.

 Carefully remove the ceramic fuel effect in its packaging.

The ceramic fuel effect base is a single piece. The individual

ceramic pieces are packed separately. Put them in a safe

place.

INSTALLER GUIDE

Figure 8. Window

removal

Figure 7. Fascia removal

Page 18