User's Manual

Enclosures Constructed Using Combustible Materials

(ZC Installations)

Optional 975ZCK Zero Clearance Kit must be used when installing the 922

replace into any application other than as an insert into an approved solid-

fuel burning replace cavity and chimney. Complete installation instructions

are packed with the 975ZCK. See gure below for clearances in front of

appliance. The 975ZCK is approved for installation directly on combustible

type ooring such as plywood. Bottom of 975 must be installed at top of

nished hearth (including tile etc.) or the removable ashpan cover will not

rest at the proper height. Cast iron fronts must also rest on a secure hearth

or oor as the unit is not intended to carry the weight of the castings. The

975ZCK may be roughed-in, wall nishes applied, and the replace installed

at a later date or the replace and ZC kit may be installed at the same time.

975ZCK Assembled

975ZCK Components

Framing dimensions

975ZCK installed into framing

975ZCK Wall nish details