User's Manual
1313
Ceramic Fuel Bed Installation
Ceramic Walls Installation
Locate the ceramic rear wall on top of the base coal support as shown.
Insert the right hand sidewall at an approximate 30-degree angle between the rebox side and the burner. Swing
the top of the sidewall to the vertical position and locate behind the upper bafe—see gure below.
Repeat step 2 with left hand sidewall.
1.
2.
3.
Ceramic Coals Installation
Rest the base coal on the supports just behind the burner and let it rest against the base coal support at the back
of the rebox.
Place the left front coal in position behind the metal lip at the front of the rebox. The side projection on this coal
should be near the middle front of the rebox.
Place the right front coal behind the metal lip at the front of the rebox. Its left side should rest over the projection
on the left front coal.
The center right coal has letter “R” embossed underneath. Place this coal behind the front right coal.
The center left coal has letter “L” embossed underneath. Place this coal behind the front left coal.
1.
2.
3.
4.
5.