Use Instructions

6 of 20 UD00023.01

THIS DOCUMENT AND DATA ARE ISSUED IN STRICT CONFIDENCE AND ARE NOT TO BE

REPRODUCED IN WHOLE OR IN PART WITHOUT WRITTEN PERMISSION FROM MANAGEMENT

Form TMP_PRD0002.05 Released December 12, 2019

Button Push - Push and hold bottom button for 1 second to cycle through 2 diagnostic aid modes.

Violet Indication - Black Light Diagnostic Aid Mode – 1 cycle at 1 minute - Turn off with either button press or AF

White Indication - White Light Diagnostic Aid Mode – 1 cycle at 1 minute - Turn off with either button press or

To cycle back to Curing Mode from Diagnostic Aid Mode, press and hold the top buttom for 1 second.

Additional Modes with Button Pressing

1) Push and hold both buttons for 1 second to put in sleep mode.

2) Push and hold either button for 10 seconds to enable/disable accelerometer function. This mode will persist

even after removing/reinserting the battery or cord.

3) Upon holding a button, you will get an audible indication at 1 seconds and 10 seconds.

4) Upon holding both top and bottom buttons you will get an audible indication when entering sleep. When

entering sleep state, you must continue holding until the audible tone is complete. When you enter the

sleep state by pressing button press, the VALO X curing light will not wake until either button is pressed.

Accessory

Mode

Indications for Use

PointCure Lens Curing Mode

Intended to aid the VALO X curing light to polymerize composite

through a translucent prosthetic.

ProxiCure Ball Curing Mode

Intended to aid the VALO X curing light to polymerize composite and

help shape contact area matrix of an interproximal restoration.

Diffuser Lens

Diagnostic Aid

Mode - White

5000 k

Intended to aid the VALO X curing light to provide for accurate

color/shade comparison or whenever natural light is needed.

Diagnostic Aid

Mode - Black <

420 nm

Intended to aid the VALO X curing light to provide visualization of

fluorescing chemicals in dental resins.

Interproximal Lens

Diagnostic Aid

Mode - White

Intended to aid the VALO X curing light in visualization of teeth and

dental prostheses.