Use Instructions

2 of 20 UD00023.01
THIS DOCUMENT AND DATA ARE ISSUED IN STRICT CONFIDENCE AND ARE NOT TO BE
REPRODUCED IN WHOLE OR IN PART WITHOUT WRITTEN PERMISSION FROM MANAGEMENT
Form TMP_PRD0002.05 Released December 12, 2019
• 1 - VALO X PointCure accessory lens
• 1 - VALO X Accessory Lens Use brochure
Overview of Controls:
Quick Start Guide:
Indicator on VALO X
State or function
Blue
Curing modes
White and Violet
Diagnostic aid modes
Red Flashing
Low battery
Red Steady
Dead battery
Amber
Device over temperature
Flashing Red and Green
AF lock out
Indicator on charger
State
Solid Amber
Pre-Charge
Solid Amber
Bulk Charge
Solid Green
Charge Complete
Both off
Standby
Cord Adapter - Remove cap at the base of the curing light with a counter-clockwise turn. Remove
battery/cell. Insert cord adapter into battery/cell compartment, fully seat adapter and turn clockwise to lock
into place.
For all products described, carefully read and understand all instructions and SDS information prior to use.
3. Delivery Form(s) (N/A - handheld dental instrument)
• Add delivery form(s) here.
4. Composition (N/A – the device is not intended to be absorbed or
locally dispersed within the body)
List primary and risk-related composition elements here in their general form without including concentration
or ranges.
5. Indications for Use/Intended Purpose
Source of illumination for curing photo-activated dental restorative materials and adhesives and light source for
visual aid.