Use Instructions

11 of 20 UD00023.01
THIS DOCUMENT AND DATA ARE ISSUED IN STRICT CONFIDENCE AND ARE NOT TO BE
REPRODUCED IN WHOLE OR IN PART WITHOUT WRITTEN PERMISSION FROM MANAGEMENT
Form TMP_PRD0002.05 Released December 12, 2019
Additionally, rinse in water in ultrasonic cleaner for 5
minutes.
Storage
Store in a clean and dry location.
Additional information
This procedure was validated by an independent and
accredited laboratory.
12. Storage and Disposal
Storage (UD Only)
If storing the curing light for periods longer than 2 weeks, or packing it for travel, always remove the batteries. If
batteries are left in the unit for long periods of time without recharging, they may become nonfunctional or un-
chargeable. Do not store batteries in temperatures over 60°C (140°F) or in direct sunlight.
Curing light Storage and Transport:
• Temperature: +10°C to +40°C (+50°F to +104°F)
• Relative Humidity: 10% to 95%
• Ambient Pressure: 500 hPa to 1060 hPa
Disposal (UD Only)
Dispose of waste (e.g., barrier sleeves) according to local rules, guidelines, and regulations.
13. Technical Considerations
A c cessories
Item
CE Information
VALO Barrier
Sleeves
MDSS GmbH
Schiffgraben 41
30175 Hanover
Germany
Manufactured by:
TIDI Products, LLC.
570 Enterprise Drive
Neenah, WI 54956
Made in USA
Distributed by:
Ultradent Products Inc
505 West Ultradent Drive
(10200 South)
South Jordan, UT 84095
USA
VALO Cordless
Light Shield
VALO Charger
VALO
Batteries
VALO X
Interproximal
Accessory
Lens
VALO X
Translume
Accessory
Lens