Product Manual

Z41322A7 - Rev B
PHT-800#
11
Maintenance and Adjustments
Maintenance and Adjustment Procedures
To keep your Powered Drum Truck operating properly, timely maintenance and adjustments
are required. These procedures should be performed only by qualied personnel who are
familiar with the equipment.
Maintenance and adjustment procedures are shown in Table 1.
Component Frequency Operation Procedure
Front Drive Wheels
(Hard Rubber Option)
Quarterly Visual Inspection Inspect drive wheels and
axles for signs of wear or
damage.
Replace hard rubber if
necessary.
Front Drive Wheels
(Pneumatic Option)
Quarterly Visual Inspection Inspect drive wheels and
axles for signs of wear or
damage.
Check pneumatic tire tread
and pressure.
Replace or ll tire as needed.
Rear Follower Wheels Quarterly Visual Inspection Inspect axle for signs of wear
or damage.
Quarterly Grease Pump grease into zerk in
both follower wheels.
Hand Brake System Quarterly Visual Inspection Inspect hand brake, clevis,
and cable for damage or
wear.
Ensure brake system is
properly adjusted.
Quarterly Visual Inspection Inspect band brakes,
eccentric bolts, and nuts for
signs of damage or wear, on
both drive wheels.
Ensure all nuts and bolts are
tight.
Table 1: Maintenance and Adjustment Procedures