User Manual

4.2) Choose the Oer
Each oer will be clearly detailed on one of the available buons. Touch the buon 1
me to program the cup. If you touch the buon more than once, you will most likely be
programming addional lls onto the cup.
Once the cup has been successfully programmed you will see a Pop-up message that
says, “The Cup has been Successfully Programmed.” If you receive an error message
insure the cup has a tag that is properly installed and valid for the locaon.
4.3) Cup info
In the boom le of the screen there is a permanently xed buon that you can use to
see the informaon that is programmed to the cup. Place the cup on top of the unit and
touch the “View Cup Info” buon.
© ValidFill, LLC 2014
07