User Manual

© ValidFill, LLC 201004
Start-Up & Operang Instrucons
3.1) Acvate the Mini POS
The Mini POS will automacally turn on when plugged in. The unit will take approxi-
mately 45 seconds to boot. During this period the screen will remain dark. For the
oponal conguraon of the unit the On/O switch needs to be in the On posion.
Once operaonal, the screen will be on and the program will be running. If unit does
not start or needs to be reset you can do so via the reset buon.
The reset buon is located directly below the connector for the power cord and is
accessible via the small hole. Using a small tool or a paper clip, insert it into the hole
and toggle the switch.
3.2) The Cashier Card
Aer the inial boot, the unit enters a locked screen
mode. In order to unlock the screen the operator will
need a cashier card for that specic locaon.
The unit can be set to operate without a cashier card,
however it is not recommended.
The unit will automacally lock itself aer a predeter-
mined me period that is decided by the customer.
© ValidFill, LLC 2014