User Manual

Table Of Contents

Do not move the Mini POS unless power has been disconnected.

Do not open the Mini POS. There are no servicable parts inside.

The Mini POS should always be stored in a cool dry place away from

sources of liquid.

Installaon Instrucons

1. Unpackage all components.

2. Place Mini POS on a level surface that is dry and clear of any obstrucon.

Prior to installaon of the Mini POS insure that the locaon has a properly

installed GFI outlet that has a power rang of 110V AC.

3. Plug the 3 prong end of the power cord into the power outlet.

4. Plug the opposite end of the power cord into the Mini POS

5. Plug in Network Cable (Oponal)

6. Wait approximately 45 seconds for the device to boot and load the soware.

All of the specicaons and requirements noted here and in the Mini POS

Specicaon and Requirements in Appendix A must be followed to avoid

damage to the Mini POS and potenal safety concerns.