User Manual
Table Of Contents
© ValidFill, LLC 2010 17© ValidFill, LLC 2014
9.2.3) The Mini POS will not program a cup.
1. Are you using a valid cup with an RFID tag on it?
YES – Proceed to the next step.
NO – Use a valid cup with an RFID tag on it and retry. If the problem persists,
connue to the next step.
2. Is the Cup centered on the top of the Mini POS?
YES – Proceed to the next step.
NO – Insure you are centering the cup precisely so the tag can be properly
interacted with.
3. Is the screen locked?
YES – Retrieve a valid Cashier Card and unlock the screen.
NO – Proceed to next step.
4. Does the Screen say, “Inializing Reader?”
YES – Reset the Unit via the reset buon. (Please refer to Diagram in Appendix B)
NO – Proceed to next step.
5. Can you program other cups?
YES – Give the customer a new cup and send the defecve cup to ValidFill for
analysis.
NO – Call ValidFill Support.