Specifications

4-2 CALIBRATING THE SCALE FOR ACCURATE %BODY FAT

1. Step on platform, when zeros flash press “7951 Enter”. A number will appear on the display.

2. To lower the % body fat: enter a lower value. The lower the number, the lower the % body

fat.

To increase the % body fat: enter a greater number (not to exceed 225). The higher the

number, the higher the % body fat.

3. After you have entered a value, press “Enter”. The display panel will read “SET”.

4. Step off the scale and re-test your % body fat.

5. Repeat steps 1 and 2 if additional adjustments are needed.

4-3 CARE AND MAINTENANCE

Proper care and cleaning of the Body Comp Scale is essential to ensure a long life of accurate

and effective operation. The following procedures should be followed carefully:

 Clean all external surfaces with a damp cloth. Mild soap and water may be used. Wipe

dry with a clean, dry cloth.

 Do not immerse control panel or base in cleaning solutions or other liquids.

 Do not exceed recommended weight of 800 Lbs. / 225 Kg. for this scale.

IMPORTANT NOTE: Do not use or store for long periods of time in chlorine atmosphere.