Specifications

ManualsBrandsValcom ManualsHome DecorVIP-D640-DS Digital Clock

1 947734

Issue 1

IP PoE Double Sided Digital Clocks

VIP-D425DS, 4 Digit, 2.5” Display, VIP-D440DS, 4 Digit, 4.0” Display

VIP-D625DS, 6 Digit, 2.5” Display, VIP-D640DS, 6 Digit, 4.0” Display

INTRODUCTION

The VIP-D425DS 4 Digit, 2.5 inch, VIP-D440DS

4 Digit, 4.0 inch, VIP-D625DS 6 Digit, 2.5 inch, and

VIP-D640DS 6 Digit, 4.0 inch Clock Displays enable

time indication, synchronization, and correction over

an IP-based LAN/WAN. This allows locating a clock

display anywhere on the network. Clock

synchronization is initiated via connection to a

factory preprogrammed internet time server or can

be programmed to sync with any NTP (Network

Time Protocol) server. The enclosure is made of

steel with a durable powder coated finish. The color

of the enclosure can easily be changed to match

any décor. Power is provided to the digital clocks

via a Power over Ethernet (PoE) switch meeting the

802.3af specification. Only one network connection

is required, supplying power and data to both clock

displays.

SPECIFICATIONS

Features

Easy to read, high visibility Red 2.5” or 4.0”

digits display hours and minutes

Selectable 12 or 24 hour format

802.3af Power over Ethernet (PoE) compatible

High Efficiency

DIMENSIONS/WEIGHT

VIP-D425DS: 11.50” L x 4.25” W x 5.50” H

(29.21cm L x 10.80cm W x 13.97cm H)

Weight: 5.9 LBS (2.68 kg)

VIP-D440DS: 17.38” L x 4.25” W x 6.85” H

(44.15cm L x 10.80cm W x 17.40cm H)

Weight: 9.1 LBS (4.14 kg)

VIP-D625DS: 16.12” L x 4.25” W x 5.50” H

(40.94cm L x 10.80cm W x 13.97cm H)

Weight: 7.3 LBS (3.32 kg)

VIP-D640DS: 25.25” L x 4.25” W x 6.85” H

(64.14cm L x 10.80cm W x 17.40cm H)

Weight: 12 LBS (5.45 kg)

Nominal Power Requirements

802.3af PoE Class 3

Environment

Temperature: 0 to +40° C

Humidity: 0 to 85% non-precipitating

Packing List

INSTALLATION

FCC Information

This equipment has been tested and found to

comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference when

the equipment is operated in a commercial

environment. This equipment generates, uses

and can radiate radio frequency energy and if

not installed and used in accordance with the

instruction manual, may cause harmful

interference to radio communications.

Operation of this equipment in a residential area

may cause harmful interference in which case

the user will be required to correct the

interference at one’s own expense.

Qty.

Item

Double Sided Digital Clock

Mounting Bracket

Mounting Bracket Screws w/Nuts

VSP Document

VIP Setup CD

Summary of content (5 pages)

PAGE 1
Issue 1 IP PoE Double Sided Digital Clocks VIP-D425DS, 4 Digit, 2.5” Display, VIP-D440DS, 4 Digit, 4.0” Display VIP-D625DS, 6 Digit, 2.5” Display, VIP-D640DS, 6 Digit, 4.0” Display INTRODUCTION The VIP-D425DS 4 Digit, 2.5 inch, VIP-D440DS 4 Digit, 4.0 inch, VIP-D625DS 6 Digit, 2.5 inch, and VIP-D640DS 6 Digit, 4.0 inch Clock Displays enable time indication, synchronization, and correction over an IP-based LAN/WAN. This allows locating a clock display anywhere on the network.
PAGE 2
Feed the network cable and seismic cable (if used) through the cutout in the clock housing before attaching to the wall or ceiling. Position the clock housing in the final mounting location and securely attach to the wall or ceiling with appropriate fasteners through the four mounting holes in the bracket. Precautionary Designations CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: To reduce the risk of electric shock, Do not remove cover. No user serviceable parts inside.
PAGE 3
Figure 1. IP Digital Double Sided Clock Wiring and Display Diagram Figure 2.
PAGE 4
Figure 3. IP Double Sided Clock Ceiling Mount Diagram Figure 4.
PAGE 5
RJ-45 Figure 5. Network Connection VALCOM LIMITED WARRANTY Valcom, Inc. warrants its products only to the original purchaser, for its own use, to be free from defects in materials and workmanship under conditions of normal use and service for a period of one year from the date of shipment. This Limited Warranty obligation shall be limited to the replacement, repair or refund of any such defective device within the warranty period, provided that: 1. inspection by Valcom, Inc.