Installation manual

29
Valcom, Inc.
5614 Hollins Road
Roanoke, VA 24019
540-563-2000 P.
540-362-9800 F.
www.valcom.com
Web Interface Programming
IP
q
 Gateway IP Address* This field allows the user to set the Gateway IP address for the master clock.
w
 Subnet Mask* This field allows the user set the Subnet Mask for the master clock.
e
 IP Address* This field allows the user to set the IP address for the device.
r
 DNS Router* This field allows the user to set the DNS Router address. The default address will typically work for most applications,
however some modification may be needed for certain networks.
t
 DHCP This drop down list allows the user to turn DHCP on or off. DHCP allows the master clock to look for an IP address on its own if the
network has a DHCP server.
y
 Send Status to Monitor on Specified IP This setting allows the clock to send out its data in broadcast mode.
u
 Monitor IP Address - This setting allows for the Monitor IP Address to be set so the monitor program can see the device across a large
network.
i
 Device Name This field allows the master clock to be named.
o
 Submit This button, when pressed, will save all of the settings.
a
 Cancel This button, when pressed, will not save any settings.
* These settings are overridden by the gateway if DHCP is turned on.
q
w
e
r
t
y
u
i
o
a
0.0