User`s guide

User's Guide ______________________________________________________________________
You can tighten the connector without the cable tightening tool by
rotating the ribbed part of the connector by hand. However, do not
use tools when tightening the connector.
1103-054
Figure 31 Tightening Connector without Cable Tightening
Tool
The following number refers to Figure 31 above:
1
=
Tighten the connector by rotating the ribbed part of the connector
by hand. DO NOT USE TOOLS
NOTE
Verify that the connector is properly tightened to avoid water leakage and
damage to
the sensor. If water leaks into the connector, this voids the
warranty for WMT700.
72 ___________________________________________________________________ M211095EN-E