User`s guide

User's Guide ______________________________________________________________________
WARNING
Make sure that you connect only de
-energized wires.
WARNING
Using a long cable between different units (sensors, transmitters, power
supplies, and displays) can cause a lethal surge voltage, if a lightning
st
rike occurs in the vicinity. Always apply proper grounding procedures
and follow the requirements of the local Electrical Code.
WARNING
Do not install WMT700 when there is a risk of thunderstorm or lightning
activity in the area.
CAUTION
Do not
modify the unit. There are no user-serviceable parts inside.
Improper modification can damage the product or lead to malfunction.
CAUTION
When handling WMT700, do not rotate, pull, strike, bend, scrape or
touch the transducers with sharp objects. Any impact on the wind sensor
array
may damage the device.
CAUTION
The heating
power supply wires of WMT700 are internally connected to
each
other. If the connection cable has two positive heating supply wires,
both must be connected to each other. Leaving one terminal unconnected
or connecting it to the ground may cause a WMT700 malfunction or a
short circuit in the power supply.
Recycling
Recycle all applicable material.
Dispose of batteries and the unit according to statutory regulations.
Do
not dispose of with regular household refuse.
14 ___________________________________________________________________ M211095EN-E