Owner's manual

26 VAISALA

Click Apply.

• If a message appears stating that the vNet Device need

s to

be restar

ted, click the

here link to restart the Device.

• If you do not need to restart the Device, click the brow

ser’s

Refresh button to update the Web interface with the new

values.

Updating Software

You may need to update the vNet Device application software if a

problem is identified, or if new features are available. You can

update the application Firmware, the Boot Loader, or the Web

interface.

Important: Only update the vNet Device when instructed to

do so by a Vaisala representative, and ensure the

update is complete before unplugging any cables.

Communication with the Logger attached to the

vNet Device is disrupted during the update.

To update the vNet Device:

From the vNet Configuration and Management interface,

choose

Utilities | Update Firmware.

2 In the Update screen, from the drop-down list, select Boot

Loader

, Firmware or Web Interface.

3 Click Browse to locate and select the update file provided by a

Vaisala representative, then click

Open.

4 Click Apply. Updating the Boot Loader or Firmware

completes in about 1 minute.

The vNet Device restarts automatically, and the Web inter-

face reloads (it takes about 1 minute for a Web interface

update to complete and the new Web interface to load).