Owner's manual

vNet User’s Guide 25
3
At the File Download prompt, click Save.
4 Choose a location where you want to save the file and specify
a file name. The default file name is
vNetConfigBackupXXXXXXXX (X denotes the 8-digit serial
number of the vNet device).
5 At the Download Complete prompt, click Close.
To restore settings from a previously saved configuration backup
file:
1
From the vNet Configuration and Management interface,
choose
Utilities | Backup/Restore.
2 On the Restore tab, click Browse to locate the configuration
file to restore, then click
Open.
3 Click Apply.
• If a message appears stating that the vNet Device needs to
be restarted, click the
here link to restart the Device.
• If you do not need to restart the Device, click the browser’s
Refresh button to update the Web interface with the new
values.
To configure another vNet Device from a backup file:
1
Open the configuration backup file in a text editor (such as
Notepad or Wordpad).
2 Edit the file by modifying lines or deleting lines (refer to
Table 1, “Configuration Backup File” on page 23, for a list of
editable lines).
3 Save the modified file with a different name but the same file
extension (.txt)
4 Locate the new vNet Device on your network (Start | Digi | Digi
Device Discovery | Digi Device Discovery
).
5 Select the Device, then click Open web interface to open the
vNet Configuration and Management interface.
6 Choose Utilities | Backup/Restore.
7 On the Restore tab, click Browse to locate and select the
modified configuration file, then click
Open.