Owner's manual

vNet User’s Guide 19
using the Lookup Interval and Followup Interval, on
an on-going cycle.
3
Specify communication channel and address:
•
viewLinc UDP Port: Accept the default port number, 9065,
unless viewLinc uses a different port number. This number
may change during regular operation.
•
viewLinc IP Address: Enter the viewLinc server IP address.
This number may change during regular operation.
4 Click Apply to save your changes. The vNet Device uses the
new settings immediately.
Managing Connections and Network
Statistics
The vNet Configuration and Management interface includes a
Connections table that shows which computers are, or have been,
connected to this vNet Device.
The Connections screen also includes a Network Statistics table
that monitors network activity.