Owner's manual

12 VAISALA

Note: The vNet Device has DHCP enabled by default. If

your network does not have a DHCP server, manually

assign a static IP address.

To manually configure IP settings for your vNet Device:

From the vNet Configuration and Management interface,

choose

Configuration | Network | IP Settings.

2 Select the option, Manually configure the IP Settings using

static values

, then enter the IP Address, Subnet Mask, and

Default Gateway supplied by your IT administrator.

3 Click Apply. When prompted, click the here link to restart the

vNet Device.

NetBIOS Name

A NetBIOS name provides an easy way to connect to your vNet

Device through a Web browser, without having to remember the

assigned IP address.

To access a vNet Device using the NETBIOS name, simply enter

the name in the address line of your Web browser:

http://NetBIOSname