Owner's manual

10 VAISALA
For example:
http://192.168.1.58
http://VERITEQ09075101
http://192.168.1.58:8000
2 At the login screen, enter the user name: root.
3 Enter the default password: dbps. You can change this
password later (see “Administrator Password” on page 16).
4 Click OK. The vNet Configuration and Management screen
displays:
To launch the vNet Configuration and Management interface using
Digi Device Discovery:
Note: If the vNet Device is configured with a TCP port for
HTTP other than the default value of 80, you need to
launch the interface from a web browser.
1 From the Start menu select Digi | Digi Device Discovery | Digi
Device Discovery
.
2 Locate your vNet Device’s MAC address (found on the side of
your vNet Device) in the MAC address list, and double-click
on it to open the login screen.
3 Enter the user name: root.
4 Enter the default password: dbps. You can change this
password later (see “Administrator Password” on page 16).