User guide

Organizing Locations into Zones
viewLinc 4.0 Administrator Guide 31
2
Right click the zone and select Rename.
3 In the Zone name dialog box, make your changes.
4 Press Enter or click outside the dialog box to complete
the name change.
Note: Renaming zones edits the zone name only; it
does not change the locations assigned within it.
To link or unlink Locations to a zone, see “Creat-
ing Zones” on page 29.
Searching for Zones and Locations
Searching the database is done using the toolbar search field
which appears beside the options dropdown at the top of a
panel. The search is executed by entering a string with
wildcards, which in turn filters the visible tree with the
information entered when the magnifying glass icon is
clicked.
The search syntax accepts zones and data locations using
the following format: ‘Room*/Temp*’ will rebuild the tree
displaying all Zones that start with ‘Room’ and all Locations
that start with ‘Temp’.
Click the magnifying glass icon to activate the filter. An ‘x’
icon will appear next to this icon, which indicates the filter is
active. Click the ‘x’ icon to deactivate the filter. While the filter
is active, only the zones and locations that match the search