User guide

Chapter 2: Management

clicking on the lower left Options button and selecting

Locations, you will need to start by adding and configuring

new Zones. This is done by clicking

Options | System

Configuration | Locations | Locations Manager.

From the left

panel, right click on the System folder and click

Add Zone.

Zones can also be created by:

• manually adding a zone using the menu command

• dragging a device/devices across to the tree and

accepting the option to create zones based on the

device names

Give it a name which describes the zone. Once a zone is

created, you can then add a location to it by right clicking and

selecting

Add Location. If no devices are displayed in the

device browser, your device may not be connected properly.

• If you use Vaisala Veriteq devices, try discovering devices

- see “Discovering Devices” on page 40.

Organizing Locations into Zones

To organize your viewLinc screen and keep a closer eye on

the locations that matter to you, you can organize your

locations into relevant zones using the Locations Manager.

By default, there is one zone created: System. If you wish to

see recently deactivated locations, click the left Options

dropdown and select the Show Deactivated checkbox.