User guide

System Requirements

viewLinc 4.0 Administrator Guide 5

Edit Alarm email templates (see “Editing Alarm Email

Templates” on page 50)

8 Create Alarm and Threshold Templates (see “Creating

Alarm Templates” on page 80)

9 Add Devices (see “Adding Devices” on page 40)

10 Set and configure Alarm Thresholds (see “Threshold

Alarms” on page 86)

11 Configure Alarms (see the sections on setting threshold,

communication and device alarms in Chapter 5: Alarms)

Once these set up activities are complete, you are ready to

start monitoring device readings, viewing events and printing

reports. You can also set up transfer schedules to view and

analyze Vaisala Veriteq device data in the vLog software (see

“About Transfers and Transfer Schedules” on page 126)

System Requirements

To install viewLinc, you need:

• Vaisala Veriteq loggers or Vaisala 300 Series Transmitters

(both are referred to as ‘devices’ in this guide and in

viewLinc)

• PC (will be referred to in the rest of this document as the

viewLinc Server)

• Vaisala Veriteq cables (there are specific cables for

attaching devices to Digi devices and attaching devices to

USB or Serial ports on a viewLinc Server)

• (optional) vNet devices, for connecting devices to a

viewLinc Server using an Ethernet connection

• (optional) Digi devices, for connecting devices to viewLinc

Server using an Ethernet connection