User guide

Device Alarms
viewLinc 4.0 Administrator Guide 93
2
On the Host or Device menu, select Communication
Alarm Settings.
The Communications Alarm Settings
screen appears.
3 Deselect the Enable Alarm check box.
4 Click Save.
Note: You can also pause alarms - for more informa-
tion, see “Pausing Alarms” on page 97.
Device Alarms
Ensuring the continuous functionality of your device is
required for accurate real-time monitoring. Because of this,
viewLinc includes device calibration, validation and
configuration alarms to notify users if device functionality is
compromised at any point. By default, there are three device
alarms (in addition to the Device Communication alarm)
preconfigured for each device. These alarms cannot be
deleted; however, they can be edited.
Setting Device Alarms
To set a device alarm:
1
From the Device Browser in Options | System
Configuration | Device Manager
, select the device you
want to set the device alarm for.
2 On the Options | Device menu select Device Alarm
Settings,
then select the device alarm type you want to
set. The Alarm Settings screen appears.