User Manual
Page 12 of 12
Veriteq, a Vaisala company Tel 604 273 6850
13775 Commerce Parkway 1 800 683 8374 (North America)
Richmond, BC, Canada, V6V 2V4 Fax 604 273 2874
www.veriteq.com | www.vaisala.com customersupport@veriteq.com
Command Syntax
The command syntax follows these conventions:
• Text in italics needs to be replaced by information specific to your network.
• Square brackets [ ] surround optional items.
• Items separated by commas allow more than one option at a time.
• Braces { } surround entries that require you to choose only one of several options, which are
separated by the vertical bar |.
• For example, choose any combination of options for “set wlan encryption”, but choose either “64bit” or
“128bit” when setting “set wlan wepmode”.
• Do not include any braces or square brackets when entering commands.
set network [if=interface] [ip=ip_address] [submask=subnet_mask]
[gateway=gateway_addr] [static={on|off}] [dhcp={on|off}] [autoip={on|off}]
set wlan protmode={bss|ibss_create|ibss_join|any}
set wlan channel={0|1-14}
set wlan ssid=string
set wlan authentication=[open],[sharedkey],[wep_auth],[wpa_psk],[wpa_auth],
[leap],[any]
set wlan encryption=[open],[wep],[tkip],[ccmp],[any]
set wlan outer_eap=[peap],[tls],[ttls],[any]
set wlan inner_eap=[gtc],[md5],[mschapv2],[otp],[chap],[mschap],
[ttls_mschapv2],[pap],[any]
set wlan options=[diversity],[short_preamble],[verify_cert]
set wlan username=string
set wlan password=string
set wlan psk=string
set wlan wepmode={64bit|128bit}
set wlan wepindex={1|2|3|4}
set wlan wepkeyN=hex_string (N=wepindex)
set wlan country=string
set wlan maxtxrate={1|2|5.5|11} (Mbps)
set wlan txpower={6|8|10|12|14|16} (dBm)
boot action={reset|factory}
show network (to confirm the network settings)
show wlan (to confirm the wlan settings)
Copyright © 2010 Veriteq Instruments, Inc. All rights reserved.
Document Number: 880-0324-00
Release Date: August 2010