User`s guide

User's Guide _______________________________________________________________________
8 _____________________________________________________________________M210295en-A
0212-242
Figure 1 RS92 Digital Radiosonde
The following numbers refer to Figure 1 above:
1 = GPS antenna
2 = Battery housing
3 = RS92-SGP Digital Radiosonde
4 = Antenna
5 = Temperature sensor
6 = Humidity sensor
7 = Sensor boom
8 = GC25 interface
9 = Additional sensor interface
All RS92 family GPS windfinding models are based on code
correlating GPS (ccGPS) receivers. Optimal performance is obtained
by combining well-known, robust ccGPS receiver architecture with
special features for radiosonde applications.
The RS92 Digital Radiosonde can be used with the new DigiCORA
III (MW21) and the DigiCORA II system (MW11, 12, 15) using the
UPP210 radio card with MWG card software update.
For up-to-date and detailed technical datasheet on the RS92-SGP
Digital Radiosonde, visit the Vaisala website at www.vaisala.com.