User`s guide

User’s Guide ______________________________________________________________________
34 ___________________________________________________________________M210785EN-E
Creating a Setup with Wizard
To create and fill out a new Wizard setup, proceed as follows:
1. Go to the Setup view as shown in Figure 11 on page 34.
0802-051
Figure 11 Setup View
2. Click New. The New Setup window opens; see Figure 12 on page
35. Name the new setup and select the QML logger version
number. The name must be unique and no longer than eight
characters. Lizard automatically suggests the highest possible
version number. Enter the name and, if necessary, change the
version number, and click OK.
The following numbers refer to Figure 11 on page 34:
1=Configure Setup frame
2 = Setup archives