Technical data

Technical Description ________________________________________________________________
64 _______________________________________________________________________________
The air temperature, humidity, and solar radiation sensors will be
installed on a sensor cross arm (DKP12SUP1 or DKP12SUP2)
typically at a height of 1.5 to 2.0 meters from the ground.
An Example of the 10-m Installation Mast with Accessories
DKP210 Specifications
Property Description/Value
Height 10 m (32.8 feet)
Diameter
Lowest section
Highest section
100 mm (3.94 in)
60 mm (2.36 in)
Maximum wind speed
With one set of guy wires
With two sets of guy wires
50 m/s (100 knots)
75 m/s (145 knots)
Weight (DKP210W with winch) 125 kg
Pedestal tube and hinge Stainless steel
Mast tubes and lifting rod Aluminum alloy
Guy wires
Material
Breaking strength
Marking
Stainless steel
28 kN (6 295 lbf)
Black and yellow colored cable shrouds
to a height of 2 meters from the ground
Threaded anchor bolts Galvanized steel, thread M20, length
300 mm (11.8 in), with M20 wedge bolts
(cast or drilled into concrete using the
provided orientation plate)
Other parts, e.g. bolts Stainless steel