User Manual

Chapter 3 _____________________________________________ Configuring Modules and Sensors
VAISALA_______________________________________________________________________ 75
To configure the humidity and temperature transmitter, proceed as
follows:
1. Configure the serial transmission hardware in the Optional
hardware view as shown in Figure 32 on page 75.
In this example, MOD1/1 on RS-232 module DSU232 is selected
for use with the HMT transmitter.
It is recommended that you keep the default settings in the Line
parameters frame.
0711-139
Figure 32 Optional Hardware View: Configuring Serial
Transmission Hardware for Humidity and
Temperature Transmitter
2. Proceed to the Equipment view; see Figure 33 on page 76.
3. Scroll down the Available list for HMT330.
4. Click the Add button to select HMT330.
5. Double-click the Connector list for HMT330 in the I/O
Connections frame in order to select the COM port.