User Manual

Chapter 5 __________________________________________ Configuring TCP/IP-Based Telemetry
VAISALA______________________________________________________________________ 307
6. In the IP Services view, add and configure an SMTP client for
alarm message transmittal.
- Add an SMTP client.
- Configure the following items for the SMTP client:
- Source domain: Use an existing one, for example, a
company domain. SMTP servers often reject messages
from unknown domains.
- Destination server: This server must be available on the
GSM operator’s network. For more information, see
connection settings often provided on an operator’s web
pages.
- Primary interface: netif0, for instance, using the GSM
modem.
7. In the Reports view, create a report to be sent to the FTP server.
8. Create an alarm report to be sent as an e-mail alert.
9. In the Communications view, shown in Figure 147 on page 307,
link the report to the previously created FTP client for
transmission, and configure the transmission parameters.
0710-115
Figure 147 Configuring Report Transmission for FTP
Client