User Manual

Chapter 5 __________________________________________ Configuring TCP/IP-Based Telemetry
VAISALA______________________________________________________________________ 305
4. In the IP Services view, add and configure an NTP client for QML
logger time synchronization as shown in Figure 145 on page 305.
0710-114
Figure 145 Configuring NTP Client
a. Add an NTP client by selecting NTP Client from the
Available list and clicking Add.
b. The settings to configure for the NTP client are outlined in
Table 67 on page 306.
Table 66 Settings for FTP Client
Setting Description
Server username User name for the FTP-server
Destination server Name of the destination FTP server
Server password Password for the FTP server
Primary interface netif0, that is, the GPRS/GSM modem you have
previously added in the Devices view
NOTE
The destination server ftp.vaisala.com used in Figure 144 on page 304
is used as an example only. It is not a public server, and the user
credentials in the setup are not valid for it.