User Manual

Chapter 5 __________________________________________ Configuring TCP/IP-Based Telemetry
VAISALA______________________________________________________________________ 303
d. Enable answering incoming calls by selecting the Accept
incoming option.
2. In the Communication interfaces view, add and configure a
communication interface for the modem as shown in Figure 143 on
page 303.
0710-112
Figure 143 Configuring Network Interface for GSM/GPRS
Modem
a. Click New to add a new interface.
b. Change the settings for the new interface (netif0) as required.
The most common operator-dependent settings for a GPRS
connection are presented in Table 65 on page 303.
NOTE
The PIN code value presented here is only an example. Ensure that a
proper PIN code is used; otherwise, the SIM card in the modem will
be locked with the PUK code after three failed PIN entries.
Table 65 Operator-Dependent Parameters for GPRS
Connections
Parameter Use
apn Network access point name
username User name for network access
password Password for network access