User Manual

Chapter 5 __________________________________________ Configuring TCP/IP-Based Telemetry
VAISALA______________________________________________________________________ 301
The network setup to be configured is illustrated in Figure 140 on page
301.
0803-096
Figure 140 Example GPRS and GSM Network Configuration
To create the network configuration using Lizard, proceed as follows:
1. Add and configure the physical communication devices in the
setup.
a. In the Optional hardware view, add the module DSU232 to
either module place.
b. In the Communication devices view, add the modem
Siemens GPRS-IP as shown in Figure 141 on page 302.
NOTE
It is not recommended that you use serial link speeds over 9600 bps.