User Manual

User's Guide ______________________________________________________________________
286 _________________________________________________________________ M210933EN-C
Command Exchange Option Disabled
Modem command exchange option Disabled is selected by default for
command exchange AT_smscentre. See Figure 134 on page 286
below.
0901-007
Figure 134 Modem Command Exchange Enabled
To enable execution of the SMS centre setting, proceed as follows:
1. In Lizard, open the Device configurations view for telemetry
devices and select the modem to configure; see Figure 134 on page
286.
2. In the left-side list in the Configuration item box, select
Command exchange.
3. In the right-side list in the Configuration item box, select
AT_smscentre.
4. Clear the Disabled check box.