User Manual

User's Guide ______________________________________________________________________
278 _________________________________________________________________ M210933EN-C
To add a new item, proceed as follows:
1. Select the type of item to add in the Item type filter list.
2. Click Add. The new item and its configuration parameters appear
above the Configuration item frame.
To remove an existing item, proceed as follows:
1. Select the type of the item in the list of available items.
2. Select the item to remove.
3. Click Remove.
To configure the modem operation in different states, proceed as
follows:
1. Define the commands to be sent to the modem. The parameters for
a command are presented in Table 51 on page 278.
Table 50 Configuration Item Types for Generic IP Modem
Type Use
Command Modem commands.
Modem response Modem responses.
Command exchange Sequence where a command is sent
to the modem and one or multiple
responses can be received in return.
Asynchronous response Similar to command exchange but
triggered by the spontaneous
modem response which should
trigger an action. For example, an
incoming call.
NOTE
The order of items is significant for command exchanges: items
belonging to same state will be executed in order defined here. You
can use the up and down arrows to change the order of execution.
Table 51 Parameters for Modem Commands
Parameter Use
Name Unique name for the command
Modem command Command string