User Manual

Chapter 5 __________________________________________ Configuring TCP/IP-Based Telemetry
VAISALA______________________________________________________________________ 237
To create station-specific parameters for an NTP client:
1. In Lizard, select Parameter sets from the Setup menu.
2. From the Category list, select IP Services.
3. Select the NTP client to which you want to add parameter(s).
4. Click Add, then enter a parameter name from the table below.
5. Select the data type and enter the default value.
Station-specific values for these parameters are set using AWS
Client.
Table 35 Station-Specific Parameters for NTP Client
Parameter name
Use
1
1. For more information, see table NTP Client Parameters.
Data Type Example Value
server1 Primary NTP server Text ntp.vaisala.com
server2 Secondary NTP server Text fi.pool.ntp.org
timetol Time error tolerance
[ms]
Number (int) 5000
primif Primary interface Text eth1
secif Secondary interface Text netif0
datagrams Number of datagrams Number (int) 3
retries Retries Number (int) 1
timeout Timeout/max roundtrip
[ms]
Number (int) 5000