User Manual

Chapter 5 __________________________________________ Configuring TCP/IP-Based Telemetry
VAISALA______________________________________________________________________ 233
Sending Log Files
FTP settings for log file transmission are configured in the Logging
view as shown in Figure 103 on page 233. For each log group, there is
an FTP tab where transmission parameters can be set.
0710-064
Figure 103 Log File Configuration for FTP Transmission
Log file transmission parameters are listed in Table 33 on page 233.
Log files’ naming is preserved when sent to the FTP server. By default,
the log files are sent two minutes after midnight.
Table 33 FTP Transmission Parameters for Log Files
Parameter Use
FTP client FTP client used for sending the log files. Usually,
it is sufficient to have one FTP client in the setup
for transmitting log files.
Destination directory Fixed path to which files are stored. This will be
automatically followed by the station name.