User Manual

Chapter 5 __________________________________________ Configuring TCP/IP-Based Telemetry
VAISALA______________________________________________________________________ 229
To create station-specific settings for an FTP parameter, proceed as
follows:
1. In Lizard, select Parameter sets from the Setup menu.
2. From the Category list, select IP Services.
3. Select the FTP client to which you want to add parameter(s).
4. Click Add, then enter a parameter name from the table below.
5. Select the data type and enter the default value.
Station-specific values for these parameters are set using AWS
Client.
To create station specific-parameters for an FTP client, see the
following sections.
NOTE
If a station-specific setting for an FTP parameter is created, it must
have a proper default value, or the value must be entered during
commissioning. Any value, including empty text, will override the
value that the parameter has received from the setup.
Table 31 Station-Specific Parameters for FTP Client
Parameter name
Use
1
1. For more information, see table FTP Client Parameters.
Data Type Example Value
server FTP server to use Text ftp.vaisala.com
user Username for the
FTP server
Text user
pass Password for the
FTP server
Text wontpass
primif Primary interface Text eth1
secif Secondary interface Text netif0
pipe Queue location Text /Ram
pipesize Queue size (items) Number (int) 50
retries Retries Number (int) 3