User Manual

Chapter 5 __________________________________________ Configuring TCP/IP-Based Telemetry
VAISALA______________________________________________________________________ 215
To add an alternative for an interface, proceed as follows:
1. From Communication interfaces, select the interface you want to
add alternatives for.
2. Click Add in the Alternative Interfaces frame. The Add
alternative interfaces dialog shown in Figure 93 on page 215 is
displayed.
0710-059
Figure 93 Adding Alternative Interfaces
3. Select the interface(s) you want to use as alternate.
4. Click OK to close the dialog.
To remove an alternate interface, select the item you want to remove
from the Alternative Interfaces list and click Remove. You can also
change the order of the alternative interfaces using the arrows on the
right of the Alternative interfaces frame.